Safety gas pressure regulator system for operating single and double cylinder systems in recreational vehicles. Gas supply during travel, e.g. for heating, is possible thanks to an integrated mechanical crash sensor with a pendulum solution that shuts off the gas flow in the event of an accident.
- Easily retrofitted, as no wall mounting of the regulator is necessary; installation is carried out directly on the gas cylinder
- Low space requirement for installation in the gas cylinder box
- Gas cylinder can remain permanently open even while driving
- Safety device crash sensor monitors the entire gas supply system in the recreational vehicle and shuts it off in the event of an accident
Advantages of the crash sensor with pendulum solution:
- Faster and easier commissioning and reset after activation
- More precise operation and therefore fewer malfunctions due to incorrect response behaviour
- Easy commissioning, even if the recreational vehicle is at an angle
Safety gas pressure regulating system for operating one-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinder.
Consists of: mechanical crash sensor with pendulum solution, low pressure regulator with overpressure safety device S2SR (ÜDS), hose line and regulator brackets.
Advantages and features
- Gas supply while driving thanks to integrated mechanical crash sensor with pendulum solution that shuts off the gas flow in the event of an accident.
- Faster and simpler activation and reset after response
- More precise operation and therefore fewer malfunctions due to incorrect response behaviour
- Activation possible without any problems, even if the leisure vehicle is on an incline
- Simple retrofitting, as the regulator does not need to be wall-mounted. Mounted directly on the gas cylinder.
- Little space required for installation in the gas cylinder box
- Gas cylinder can also remain permanently open while driving
- Increased safety, as the gas supply is interrupted directly at the gas cylinder in the event of an accident
- Medium-pressure hose (rubber with textile insert; cold-resistant to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 LH-ÜM x RVS 10 x 450 mm for connecting the system to the vehicle's supply line
- RVS 10 / 8 outlet connection is equipped as standard with a transition piece for connection to 8 mm pipes
- Brackets for safe storage of the regulator on the wall, e.g. when changing the gas cylinder
- Individual fittings with DIN-DVGW or DVGW type examination certificate or EU type examination certificate DGR
